Table of Contents
Advertisement
17 | Lap Trigger
17.7 Predated Laptime
17.7.1 Setting up the predated laptime
122 / 144
Following signals are assigned to the function:
Laptrigger_trackdet_id
Laptrigger_trackdet_laplen
Laptrigger_trackdet_lat
Laptrigger_trackdet_long
The predated laptime function allows to compare the current lap- and segment time with
the predated time of an expected lap. Additional the function can estimate the laptime of
the current lap. This functionality is integrated in the laptrigger module in RaceCon.
To use the predated laptime function you need to set up a laptrigger as described in the
chapter Lap Trigger [} 109]. Under the ribbon "Segment timing" you need to choose your
segmentation mode which can either be distance or intermediate trigger based.
Manual_C_80
Signal will show the track name from the
Racetracks list as an enumeration or can
show the ID number as raw value. The enu-
merated name will also be visible in the log-
ging.
Track length of the used track variant
Latitude GPS coordinate of the used GPS
trigger point
Longitude GPS coordinate of the used GPS
trigger point
Bosch Motorsport
Advertisement
Table of Contents
