Table of Contents
Advertisement
9 | Project Configuration
40 / 144
The parameter-based trigger points need to be set manually in RaceCon, the macro-
based trigger points will store latitude and longitude values when the configurable trigger
condition comes true (i.e. steering wheel button). This trigger condition and the detection
range need to be configured in RaceCon.
The GPS trigger points can also be used for segment triggering. If used as segment trig-
gers and i.e. 3 trigger points are selected, the laptrigger module will use the first 3 trigger
points on the list.
Manual_C_80
Bosch Motorsport
Advertisement
Table of Contents
