Paging Group Configuration - Tech Works MC-IP Series Manual

Page Group Configuration is a separate screen used to set up a group of Stations that are
commonly paged at the same time. Each ODC has the ability to set up 16 (0-15) separate
Page Groups/Zones that are unique to that ODC. Most of the time an ODC has Stations that
they page that are not tied to any other ODC. However, a central command control location
may want to Page multiple ODC areas including ODCs.
Group Select, up at the top left, represents the Zone you want to create 0-15.
"Page Type" select:
Override Page will override any other Stations call or page currently in process by
putting current calls on hold while Priority page occurs and restoring them when it
ends.
Standard Page will override local intercom calls, placing them on hold until the Page
ends, but will not override other Page calls.
Page Name For convenience you can give each Page Group a name to identify it.
To select the stations to include in a Group you can individually click on each station box
associated with each MC-IP-116. Or to select all station on a particular 116 you can just
double click on the 116 buttons at the left.
Repeat to create up to 16 Groups/Zones for each ODC.
Typically, Zone "0" is used to set a Zone that represents "All Call" on a particular ODC.
Console allows you to add ODCs to include in this Group by selecting them individually or
All by double clicking the Console button.
1/24/2021 Tech Works MC-IP-Series System Planning & Installation Manual Page 25 of 32