Mc-Ip Configuration Utility - Tech Works MC-IP Series Manual

MC-IP Configuration Utility

To set up your Modular Communication over Internet Protocol intercom system, a utility
program is provided that will create and store your configuration. This program identifies all
32 MC-IP-ODC Operator Desk Consoles and how they will send and receive calls. Each
ODC can also have up to 16 unique Paging Zones which are set up and assigned to each
ODC in the Configuration Utility. It also Identifies all 32 MC-IP-116 Station Control Modules
and all of their 16 Stations and all of their calling attributes.
Begin by clicking on "Setup" and installing the "Tech Works MC Configurator. Application".
Once it is installed the above window will appear.
To start a new application, fill out the System Information screen and save your new
configuration. When you "Save" your file you will be prompted for a "File" name, so the
Description, Location, Room that you fill in is only for your reference and will not affect the
file name.
The "Enable API" is a check box to indicate that this configuration will use the API commands
to control the system.
1/24/2021 Tech Works MC-IP-Series System Planning & Installation Manual Page 16 of 32