Download Print this page
Tech Works MC-IP-ODC-TS User Manual

Tech Works MC-IP-ODC-TS User Manual

Operator desk console touch screen
Hide thumbs Also See for MC-IP-ODC-TS:

Advertisement

Quick Links

Tech Works
MC-IP-ODC-TS
Operator Desk Console
Touch Screen
User Guide
800-813-1080
www.techworks-usa.com
06/21

Advertisement

loading

Summary of Contents for Tech Works MC-IP-ODC-TS

  • Page 1 Tech Works MC-IP-ODC-TS Operator Desk Console Touch Screen User Guide 800-813-1080 www.techworks-usa.com 06/21...
  • Page 2 Remote communication and Master to Master Communication up to 32 Masters and 512 Remotes. The MC-IP-ODC-TS is a self-contained Internet Protocol Operator Desk Console (ODC) master audio console with built in Touch Screen for system control. A variety of screens give the user complete control to: 1.
  • Page 3 Orange to indicate that it is talking to an Operator. To END the call, press the “END CALL” button in the upper right-hand corner of the screen. To talk to any other station simply select any Green Icon. 6/9/2021 Tech Works MC-IP-ODC-TS User Guide Page 3 of 8...
  • Page 4 If your console is in a different screen and there is a call pending on the system, the STATION button will turn Red telling the Operator to press the STATION button to see and answer the pending call. 6/9/2021 Tech Works MC-IP-ODC-TS User Guide Page 4 of 8...
  • Page 5 If console #4 accepts the call by answering it the operators can speak to each other just like talking to a remote. As with any other call, when the conversation is finished press “END CALL”. 6/9/2021 Tech Works MC-IP-ODC-TS User Guide Page 5 of 8...
  • Page 6 Talk Button on the Console and start talking. If the ODD PAGE button was selected the screen would change to indicate the current active page by turning the Icon Purple. 6/9/2021 Tech Works MC-IP-ODC-TS User Guide Page 6 of 8...
  • Page 7 If a Call was active on the system that station would light up Red to indicate that a Call from station 3 will come in as soon as the Page is complete. 6/9/2021 Tech Works MC-IP-ODC-TS User Guide Page 7 of 8...
  • Page 8 If a console needs to be put out of service or not be available to take calls, it can Forward calls to another operator console. By default, no calls are programmed to be forwarded. If station calls were programmed for Forwarding, they would appear if this window. 6/9/2021 Tech Works MC-IP-ODC-TS User Guide Page 8 of 8...