programming is done, you'll see the light on the Director Board blink 10
times, pause, then repeat. That's your cue that the program was uploaded
successfully.
Press the "RST" button again to reset the system and begin the program!
If you have any troubles, visit the troubleshooting page for help resolving
your issues.
Further Reading
For general Spectacle information, please check out the user guide:
Spectacle User's Guide
M AY 4 , 201 7
The Spectacle system is designed to help those without electronics or
programming experience integrate electronics into projects.
For more Spectacle fun, check out the additional tutorials below:
Spectacle Audio Board
Hookup Guide
All the information you need to use
the Spectacle Audio Board in one
place.
Spectacle User's Guide
The Spectacle system is designed
to help those without electronics or
programming experience integrate
electronics into projects.
Spectacle Sound Kit Hookup
Guide
All the information you need to use
the Spectacle Sound Kit in one
place.
Spectacle Light Board
Hookup Guide
All the information you need to use
the Spectacle Light Board in one
place.
Page 32 of 33
Need help?
Do you have a question about the KIT-14173 and is the answer not in the manual?
Questions and answers