sparkfun KIT-14173 Hook-Up Manual page 15

Turns on one light and blanks the rest of the lights to off.
• "listen to channel number __" - A momentary signal on this
channel is all that is needed to trigger a light pixel operation, and the
lit pixel will persist until another effect starts.
• "wait for __ seconds" - This delay allows for sequencing effects.
Most often you'll probably set it to 0.
• "clear lightstrip number __" - Select the lightstrip to operate upon.
• "and light pixel number __ " - The number of the pixel, from closest
to the Light board out, to turn on.
Converting Sounds to OGG Vorbis
Format
The files used by the Spectacle Audio Board must be in OGG Vorbis
format. This free, lossy codec has a higher compression ratio than MP3,
and, more importantly, can be used without paying a licensing fee to any
third part organization.
Download and Install Audacity
We'll be using the free, open source program "Audacity" to convert from
whatever your file's current format is to OGG Vorbis.
Audacity is available across all three major operating systems, so you
shouldn't have any trouble getting it installed.
When you start Audacity, you'll see this screen, or one very like it. While at
first blush it seems extremely complex, none of this crap is important to
us, so don't panic.
Page 15 of 33