Configure Slide Id - Hologic Genius Operator's Manual

5. For Interleaved 2 of 5 and for Code 39, specify whether your laboratory uses a check digit in
the barcode. Touch "Yes" or "No"
Figure 3-27 Configure Barcodes: Choose Check Digit Use for Interleaved 2 of 5 and for Code 39
6. For Code 39 or Interleaved 2 of 5 barcodes, the touch screen display returns to the Slide ID
type selection screen. Either "Check digits not required" or "Check digits required" appears
under the Code 39 button or the Interleaved 2 of 5 button.
To change the check digit setting touch Code 39 or Interleaved 2 of 5 again.
7. For Code 39 or Interleaved 2 of 5 barcodes, touch Apply to save the selection and close this
screen. Or, touch Close to close the screen without changing the current selection.

Configure Slide ID

The Configure Slide ID feature allows the slide ID or accession ID number used by the Genius Digital
Diagnostics System to be the same as, or only a portion of, the slide ID on the slide label itself. The
Figure 3-28 Configure Slide ID Button
U I
SER NTERFACE
Genius™ Digital Imager Operator's Manual
3
3.25