Cleaning And Maintenance; Washing Instructions - BQS BSFIX123 Instruction Manual

8. RETIRAR LA SILLA dE SEGURIdAd
IMPORTANT! Remove the safety seat from the vehicle.
it should not be transported inside the vehicle if it is not
correctly installed.
Group 1 (ISOFIX and Top Tether)
1. To free the iSoFiX anchoring, pull the iSoFiX
adjuster (7) while moving the seat backwards, leaving
the iSoFiX locking arms exposed. The system unlock
buttons will be visible.
2. Press the iSoFiX system unlock buttons (17), first on
one side then the other, in order to free the seat from
the vehicle iSoFiX anchoring system. The buttons
will change from partially green to red.
3. To free the Top Tether anchoring system loosen the
strap by pressing the adjuster button then unclip the
safety clasp from the anchoring point.
4. By pulling the iSoFiX adjuster (7) the iSoFiX locking
arms will slide into the seat again.
Groups 2 and 3 (ISOFIX and vehicle safety belt)
1. Unclip the vehicle safety belt securing the safety
seat.
2. To free the iSoFiX anchoring, pull the iSoFiX
adjuster (7) while moving the seat backwards, leaving
the iSoFiX locking arms exposed. The system unlock
buttons will be visible.
50
3. Press the iSoFiX system unlock buttons (17), first
on one side, then the other, in order to free the
seat from the vehicle iSoFiX anchoring system. The
buttons will change from partially green to red.
4. By pulling the iSoFiX adjuster (7) the iSoFiX locking
arms will slide into the seat again.

7. CLEANING ANd MAINTENANCE

1. Straps and plastic parts should be cleaned using a
neutral detergent and warm water.
2. Make sure soap does not enter the buckle or other
metal parts.
3. Do not use chemical products or bleach on any part of
the seat.

WASHING INSTRUCTIONS:

30 °C
· dry clean, any solvent
· The cover can be
except trichlorethylene.
removed and washed at
· do not use a dryer.
30 °C. It should only be
· do not iron.
air-dried.
· Machine wash, cold.
· do not use bleach.
If you have any doubts about using or installing this product,
or you need a replacement part, please get in touch with our
customer service team.