Cleaning And Maintenance - BQS BNFIX BI 123 Instruction Manual

6. CLEANING AND MAINTENANCE

6.1 Removing the fabric cover.
1. Remove the 5-point harness.
2. Take off the cover from backrest and base.
3. Move the headrest of child seat up to the higest position.
4. First take the cover of the base of the headrest, then remove the cover of
the headrest.
To refit the cover, simply follow the above steps in reverse.
6.2 Washing.
1. To clean the straps and plastic elements of the seat use a neutral
detergent and warm water.
2. Make sure that soap does not enter the buckles or other metallic
elements.
3. Do not use chemical products or bleach on any part of the seat.
WASHING INSTRUCTIONS:
· The cover is removable and
can be washed at 30°. It
should not be machine dried.
· Machine wash – Cold cycle.
· Do not bleach.
If you have any doubts or queries regarding the use or placement of this product or you need
any replacement elements, please contact our Customer Services Department.
7. GUARANTEE
This product is covered by a legal warranty under the terms and conditions
in Royal Legislative Decree 1/2007, from the 16th of November. For a period
of 2 years after the date of purchase, any lack of conformity existing at the
time of delivery of the product is covered. It is essential to keep the purchase
ticket or invoice proving the purchase of the product within the warranty
period. The instructions for use given in the product manual must be followed
carefully for its start-up, as well as for the subsequent and proper operation
of the product. This warranty does not cover defects arising from accidental
deterioration, misuse, abuse of the product, improper maintenance, or repair
by unauthorised technical personnel or service, in which case the user shall
bear the costs of delivery and, where applicable, the repair. The warranty
does not cover consumable components, such as batteries or coatings
exposed to wear and tear, that are the result of normal use of the product.
www.babyqs.com
· For dry cleaning use
any solvent except
trichloroethylene.
· Do not use a drier.
· Do not iron.
30 °C
19