Print Specifications; Ribbon Specifications - Wasp WPL618 Series User Manual

1.4 Print Specifications

Print
Specifications
Print head resolution
(dots per inch/mm)
Printing method
Dot size
(width x length)
Print speed
(inches per second)
Max. print width
Max. print length
Printout bias

1.5 Ribbon Specifications

Ribbon Specifications
Ribbon outside diameter
Ribbon length
Ribbon core inside diameter
Ribbon width
Ribbon wound type
Ribbon end type
WPL618
203 dots/inch
(8 dots/mm)
Thermal transfer/ or direct thermal
0.125 x 0.125 mm
(1 mm = 8 dots)
2,3,4,5...18 ips
selectable
Up to 18 IPS
Max. 4 ips for peeler mode
1000" (25400 mm)
Vertical: 0.3 ~ 1 mm max.
Horizontal: 1 mm max.
Max. 90 OD
600 meter
1" (25.4 mm)
25.4 mm ~ 114.3 mm (1"~4.5")
Ink coated outside wound, ink coated inside wound
Transparency
- 5 -
WPL618-300
300 dots/inch
(12 dots/mm)
0.084 x 0.084 mm 0.042 x 0.042 mm
(1 mm = 12 dots) (1 mm = 24 dots)
2,3,4,5...14 ips 1.5,2,3.... 6 ips
selectable
Up to 14 IPS
4.09" (104 mm)
450" (11430 mm) 100" (2540 mm)
WPL618-600
600 dots/inch
(24 dots/mm)
selectable
Up to 6 IPS