Before Using Your Dehumidifier - Mitsubishi Electric MJ-E130AL-H Instruction Manual

Before Using Your Dehumidifier

Setting the silver ion
filter
The silver ion filter is supplied with the unit at time
of purchase. Please install it before using the unit.
1
Remove the silver ion filter from
the polyethylene bag.
2
Remove the pre-filter.
Performance is unaffected even if the metal fin
inside the unit are slightly bent.
Inserting the water
tank correctly
Tank
Make sure
the tank is
not broken
or cracked.
Secure the tank lid and tank guard properly or else the
tank may become stuck.
10
Pull the pre-filter
toward you, and
then remove it.
Tank Lid
Tank Guard
Make sure the tank
is inserted correctly.
3
Set the silver ion filter.
With the strips facing up, set the silver ion
filter inside the tabs on the pre-filter.
Strips
Tabs (4)
4
Set the pre-filter.
Make sure the silver ion filter is attached to the unit.
If it is not, fine dust will enter inside the unit and cause a
malfunction.
Plugging the power cord
into the power socket
Use a 220V AC power socket only.
The current humidity is indicated.
If the louvre is open, it closes automatically.
Insert the bottom
tabs into the unit
until they click.