Page 1
Model No. MT4000 Owner’s Manual MITER SAW STAND QUESTION... 1•847•780•6120 Visit us on the web at www.powertecproducts.com You will need this manual for safety instructions, operating procedures, and warranty. Put it and the original sales invoice in a safe, dry place for future reference.
SAFETY RULES SAFETY FOR WORK STAND WARNING • Do not attempt to assemble or operate your miter saw For your own safety, read all of the rules and precautions stand until you have read the safety instructions in this before operating tool. section.
ASSEMBLY UNPACKING TOOLS NEEDED Refer to Figure 1 The following tools (not included) are needed to assemble Check for shipping damage. Check immediately whether the miter saw stand: all parts and accessories are included. Adjustable pliers ITEM DESCRIPTION #6 Hex wrench Miter Saw Stand #13 Open end wrenches Quick Release Mounting Brackets...
ASSEMBLY ASSEMBLE HANDLE • Assemble the small locking knobs to the frame as shown. Refer to Figure 4 Figure 6 • Secure handle to frame with hardware supplied. Figure 4 Roller Bar Small Locking Knob Lock Washer Flat Washer Handle Pig Tail Cord Connection Plug Large...
• The quick release mounting brackets hook onto the WARNING miter saw stand frame. Using the handles on the quick release mounting brackets, lift the miter saw and Do not mount a table saw on this miter saw stand. position the quick release mounting brackets onto the Aggressive feeding of sheet materials into a table saw miter saw stand as shown in Figure 7 (SAW IS NOT could cause the stand to tip over.
TRANSPORTATION • To move the stand, use handle to lift and tilt the miter saw stand onto the wheels. Move miter saw stand as Refer to Figure 10 shown. WARNING Figure 10 Risk of unsafe operation. Ensure proper footing and use caution when rolling the miter saw stand to prevent tipping or loss of balance.
30- DAY SATISFACTION GUARANTEE POLICY During the first 30 days after the date of purchase, if you are dissatisfied with the performance of this POWERTEC tool for any reason, you may return the tool to the retailer from which it was purchased for a full refund or exchange. You must present proof of purchase and return all original equipment packaged with the original product.