Page 1
Model No. MT4004 Owner’s Manual MITER SAW STAND QUESTION... 1•847•780•6120 Visit us on the web at www.southerntechllc.com You will need this manual for safety instructions, operating procedures, and warranty. Put it and the original sales invoice in a safe, dry place for future reference.
SAFETY RULES SAFETY FOR WORK STAND WARNING • Do not attempt to assemble or operate your miter saw For your own safety, read all of the rules and precautions stand until you have read the safety instructions in before operating tool. this section.
ASSEMBLY UNPACKING TOOLS NEEDED Refer to Figure 1 The following tools (not included) are needed to assemble Check for shipping damage. Check immediately whether the miter saw stand: all parts and accessories are included. Adjustable pliers ITEM DESCRIPTION Phillips screwdriver Miter Saw Stand 10 mm wrench or socket Quick Release Mounting Brackets...
ASSEMBLY Figure 3 Figure 5 Roller Bar Washer Wheel (Ø8) Roller Arm Axle Bracket Locking Lever Washer (Ø12) Axle Washer (Ø8) MOUNTING THE MITER SAW Retaining Refer to Figure 6-7 Ring WARNING Risk of accidental starting and serious personal injury. Unplug the miter saw before attaching it to the miter saw stand.
Figure 7 WARNING Hook to Rail Risk of serious personal injury. Always make sure the Front of Saw miter saw is fully supported and securely attached to Assembly tilted a level work surface. Make sure the miter saw stand is toward you located on a flat surface.
TRANSPORTATION Figure 9 Refer to Figure 9 WARNING Risk of unsafe operation. Ensure proper footing and use caution when rolling the miter saw stand to prevent tipping or loss of balance. • Lift up on the end of the miter saw stand with wheels. •...
30- DAY SATISFACTION GUARANTEE POLICY During the first 30 days after the date of purchase, if you are dissatisfied with the performance of this POWERTEC tool for any reason, you may return the tool to the retailer from which it was purchased for a full refund or exchange. You must present proof of purchase and return all original equipment packaged with the original product.