Maintenance - Physipro Valdis Manual

MAINTENANCE

Regular cleaning eliminates the accumulation of dirt and grime and helps extend the life of your backrest. It is
recommended to visually inspect the components of the backrest during the cleaning process.
Cleaning the backrest and lateral support covers
1. Remove cover from backrest and/or lateral supports and fasten the zipper.
2. Machine wash in cold water on the gentle cycle or hand wash with a mild detergent.
3. Allow to air dry completely.
4. Reinstall cover on the foam padding.
WARNING
• Do not iron.
Cleaning the backrest padding
1. Remove backrest cover and the incontinence cover, if necessary.
2. Wipe foam padding lightly with a damp cloth, without soap or detergent.
3. Use a clean dry cloth to gently press on padding to absorb excess moisture, then let air dry completely.
4. Reinstall cover(s) on the backrest.
WARNING
Do not use soap.
•
Do not submerge in water.
•
Never machine wash or dry the foam padding.
•
Cleaning the straps and buckles
Wipe straps and buckles lightly with a damp cloth, using a mild detergent and warm water.
WARNING
• Do not machine wash the straps.
• Do not iron.
Cleaning the hardware
The aluminum hardware can be cleaned with warm water and a mild liquid detergent. No other maintenance is
required.
14 Révision 01
May 21