Maintenance - Physipro TWO-POINT PADDED POSITIONING BELT Owner's Manual

Owner's manual
Adjusting the pelvic positioning belt
To adjust the length of the positioning belt, slide the belt strap C into the plastic
slide buckle D and tighten or loosen until the belt fits snugly without causing any
discomfort.
WARNINGS
• When using your wheelchair, it is important to always fasten
your positioning belt for added protection.
•
It is important to adjust your positioning belt to maximize
comfort and safety.
• Improper use can result in serious injury or death.

MAINTENANCE

Regular cleaning eliminates the accumulation of dirt and grime and helps extend
the life of your positioning belt.
Cleaning the pelvic positioning belt
A weekly cleaning is recommended.
1. With a mix of water and a soft soap or neutral detergent, gently wipe the belt.
2. Remove excess moisture by lightly patting the belt with a clean cloth and
then let air dry completely.
WARNINGS
•
Do not submerge in water.
•
Never machine wash or dry.
•
Do not iron.
Storage
Postural supports must be stored in a dry and secure area.
WARNINGS
•
Never store your postural support in direct sunlight, near a heat
source or in a high-humidity environment.
•
Never place your postural support near sharp objects or in an area
where it may be struck by an object.
Life span
The estimated life span of your postural support is three (3) years.
Disposal of Medical Devices
Do not burn or throw away medical devices outside of designated areas.
C
D
5
October 2022