Physipro Valdis Manual page 11

Installing the lateral supports (option)
The lateral supports offered with the Valdis
mounting clamps on all the lateral supports offered, ensure height positioning precision and easy installation.
Installing the mounting clamps of the Adjustable or Foldable and adjustable
lateral supports
Required tool: 4mm Allen key
1. Open the mounting clamp by unfastening screws A
and loosening set screws B with a 4mm Allen key.
2. Open the zippers of the backrest post covers.
3. Install the mounting clamp on the back post with the
screw heads facing outwards.
4. Position the mounting clamp at the desired height and
tighten screws A and set screws B.
5. Repeat these steps for the second lateral support.
Make sure that both mounting clamps are positioned
at the same height.
Installing the mounting clamps of the Fixed to back post lateral supports
Required tools: 4mm and 5mm Allen keys
1. Open the mounting clamp by unfastening screws A
with a 5mm Allen key and loosening set screws B with
a 4mm Allen key.
2. Open the zippers of the backrest post covers.
3. Install the mounting clamp on the back post with the
screw heads facing outwards.
4. Position the mounting clamp at the desired height and
tighten screws A and set screws B.
5. Repeat these steps for the second lateral support.
Make sure that both mounting clamps are positioned
at the same height.
backrest can be installed on ¾
TM
11
to 1 back post. The use of universal
" "
B
B
Adjustable
B
B
Foldable and adjustable
B
B
A
A
Fixed to back post
A
A
A
A
Révision 01
May 21