Maintenance - Physipro ELBOW STOPS Owner's Manual

MAINTENANCE

Regular cleaning eliminates the accumulation of dirt and grime and helps extend
the life of your upper limb support. It is recommended to visually inspect all the
components of the upper limb support during the cleaning process.
A weekly cleaning is recommended.
Cleaning the elbow and lateral stops
1. Remove the neoprene cover from the rigid structure.
2. Wash the neoprene cover with a mild soap or neutral detergent and rinse
thoroughly. Let the cover air dry completely.
3. With a dry cloth, dust off the rigid structure surface before cleaning.
4. Gently wipe the rigid structure with a cloth dampened with a mild soap or
neutral detergent and dry-off with a clean cloth.
5. Remove all debris on the padding surface.
6. With a mix of water and a soft soap or neutral detergent, gently wipe clean
the padding.
7. Remove excess moisture by lightly patting the surfaces with a clean cloth and
then let air dry completely.
8. Once all components are completely dry, reinstall the neoprene cover.
WARNINGS
• Do not submerge the foam padding in water.
• Never machine wash or dry.
Storage
Upper limb supports must be stored in a dry and secure area.
WARNINGS
•
Never store your
source or in a high-humidity environment.
•
Never place your
area where it may be struck by an object.
Life span
The estimated life span of
Disposal of Medical Devices
Do not burn or throw away medical devices outside of designated areas.
upper limb support
upper limb support
6
Elbow and lateral stops
in direct sunlight, near a heat
near sharp objects or in an