Chapter 79 Maintenance; What You Can Do; Backup Configuration - ZyXEL Communications XS3800-28 User Manual

This section explains how to configure the screens that let you maintain the firmware and configuration
files.

79.1 What You Can Do

• Use the Backup Configuration screen
use.
• Use the Firmware Upgrade screen
• Use the Reboot System screen
turning the power off and load a specific configuration file.
• Use the Restore Configuration screen
configuration file.
• Use the Save Configuration screen
settings to a specific configuration file on the Switch.
• Use the Tech-Support screen
there are problems with the Switch.

79.2 Backup Configuration

Backing up your Switch configurations allows you to create various "snap shots" of your device from
which you may restore at a later date.
Click Maintenance > Maintenance > Backup Configuration to display the screen as shown next. Use this
screen to back up your current Switch configuration and log files to a server or as local files to your
computer.
Figure 539 Maintenance > Maintenance > Backup Configuration
Follow the steps below to back up the current Switch configuration to your computer in this screen.

Chapter 79 Maintenance

C
Maintenance
(Section 79.2 on page
(Section 79.3 on page
(Section 79.4 on page 673) to restart the Switch without physically
(Section 79.5 on page
(Section 79.6 on page
(Section 79.7 on page 675) to create reports for customer support if
XS3800-28 User's Guide
671
H A P T E R
671) to save your configuration for later
672) to upload the latest firmware.
674) to upload a stored device
674) to save the current configuration
79