Cloud Management - ZyXEL Communications XS3800-28 User Manual

Figure 105 Basic Setting > Stacking > Configuration
The following table describes the labels in this screen.
Table 52 Basic Setting > Stacking > Configuration
LABEL
Active
Apply
Cancel
Force Master
Mode
System Priority
Apply
Cancel
Slot ID Freeze
Slot
MAC Address
Type
Slot ID After
Reboot
Apply
Cancel

8.12 Cloud Management

The Zyxel Nebula Control Center (NCC) is a cloud-based network management system that allows you
Chapter 8 Basic Setting
DESCRIPTION
Select the Active check box to put the Switch in stacking mode. This will erase the running
configuration, config01 and config02. The master Switch's login will remain unchanged. If you
want to reload a previous configuration, please back one up first.
Click Apply to activate the stacking mode.
Click Cancel to clear the Active check box.
Select the Force Master Mode check box to force this Switch to become a master Switch.
Enter a number (from1 to 63) to assign a priority for the stacking Switch. The higher the number,
the higher the priority.
Click Apply to save the Active Force Master Mode and System Priority fields.
Click Cancel to clear the Active Force Master Mode and System Priority fields.
Click the Freeze button to have the Switch retain its slot ID after reboot.
This field displays the slot or port channel of the stacked Switch.
This field displays the MAC address of the stacked Switch.
This field displays the model name of the Switch.
Choose Auto to have a new slot ID assigned after reboot. If you want to keep the original slot ID
after reboot, you can click Freeze or select an ID in the Slot ID After Reboot list box.
Click Apply to save the Slot ID After Reboot field.
Click Cancel to clear the Slot ID After Reboot field.
XS3800-28 User's Guide
142