Cleaning Of The Oven Glass; Replacement Of The Oven Lamp - Simfer Good User Manual

10.2. Cleaning of the Oven Glass

Open the oven door. Pull out the plastic latches on the right and left
side as shown in Fig. 12 and pull out the profile towards yourself as
shown in Fig. 13. Glass is free after the profile is removed as shown
in Fig. 14. Carefully pull the glass that has become free toward you.
The outer glass is fixed to the oven door profile. You may easily clean
the glasses after they have been separated. Once the cleaning and
maintenance is complete, you may replace the glasses by performing
the removal procedure in reverse. Make sure that the profile is seated
properly.
Figure 12

10.3. Replacement of the Oven Lamp

WARNING: Disconnect power supply and wait for the oven to cool down
to eliminate the risk of electrocution before replacing the oven lamp.
Hot surfaces may cause burns.
Remove the glass protector by rotating it. Using plastic gloves may
help you if you have difficulty in rotating it.
Then, remove the lamp by rotating it, and install the new lamp with the
same specifications. Replace the glass protector, plug the appliance and
complete the replacement procedure. You may now use your oven.
Type G9 Lamp
220-240 V, AC
15-25 W
Figure 15
GB
Figure 13
Type E14 Lamp
32
2
Figure 14
220-240 V, AC
15 W
Figure 16