Simfer Good User Manual page 25

8.5.8. Full Automatic Cooking
This method is used when the food is desired to be ready at a certain
time in the future. Therefore, it is also called as the delayed cooking.
1. Follow the steps 1 and 2 of the semi-automatic cooking.
(setting the cooking time)
2. Press the
displayed on the screen.
3. Cooking end time is set by using the
keeps flashing on the screen. This indicates that the delayed cooking is
programmed, but it is not started yet.
4. You may end the setting by pressing the
button is not pressed, setting shall be cancelled automatically after
about 6 seconds and time of the day is displayed.
Remark: To reset the setting times, press
once.
8.5.9. End of Auto Cooking
When the cooking is completed automatically, the
to flash for semi-automatic cooking, and the
flash together for full automatic cooking. Alarm may be turned off by
pressing any key. Oven is taken to the manual mode by pressing the
key. Alarm shall sound for 5 minutes and oven shall be kept deactivated
when no key is pressed.
8.5.10. When the Power is Interrupted and Restored
In case of mains power failure, the oven will remain off for safety
reasons. This is indicated with the flashing of the clock on the screen.
Clock is displayed as 12:00 on the screen. In such a case, the clock
shall be set. (See When the Power is Restored)
Remark: Clock flashing on the screen indicates that the oven is
deactivated and you shall switch to ''manual mode'' to return to the
normal mode.
key again, the
GB
symbol and the cooking end time is
and
button 2 times. If this
and
and
25
buttons. symbol
buttons together
symbol starts
symbols start to