Table of Contents
Advertisement
No other tool is needed for DIN rail installation. The DIN rail bracket has a standard
size of 35 mm. Put the upper inner side of the bracket profile on the DIN rail and push
its bottom side to make the bracket click and fit to the DIN rail. Now all you have to
®
do is slide
2N
EasyGate IP
from the top into the bracket profile (A) and fit its
position with a screw (B).
Wall Installation
®
Use the bracket and two dowels with screws included in the package to install 2N
EasyGate IP
on a wall. Drill holes in a selected place and selected height of the wall
and insert the dowels. Pass the screws through the bracket holes and screw them into
®
the dowels in the wall. Now all you have to do is slide
2N
EasyGate IP
from the top
into the bracket profile (A) and fit its position with a screw (B).
2N TELEKOMUNIKACE a.s., www.2n.cz
17/92
Advertisement
Table of Contents
