2N EasyGate IP User Manual page 15

®
Place 2N EasyGate IP
electromagnetic interference reasons. The installed device is intended for
permanent operation with the minimum separation distance of 20 cm from the
user.
For the allowed range of operating temperatures refer to Section 8. Technical
Parameters .
®
2N EasyGate IP
or near heat sources.
®
2N EasyGate IP
flowing water, condensing moisture, fog, etc.
®
2N EasyGate IP
etc.
®
2N EasyGate IP
means of transport, machine rooms, etc.
Make sure there is enough free space above and under
cabling and flowing air to conduct heat away.
An improper placing of
broadcasting or other high-frequency sensitive devices may have an adverse
affect on their functionalities.
Caution
Make sure that you have all equipment necessary for putting 2N
EasyGate IP
USB-C cable for device-PC interconnection).
Warning
Only vertical mounting with the connectors heading down guarantees
that the device is waterproof. If installed otherwise, the device may be
infiltrated with water and damaged irreversibly!!!
2N TELEKOMUNIKACE a.s., www.2n.cz
out of range of sensitive devices and human bodies for
may not be operated on sites exposed to direct solar radiation
is designed for indoor use. It may not be exposed to rain,
may not be exposed to aggressive gas, acid vapors, solvents,
is not designed for environments with high vibrations such as
®
2N EasyGate IP
in operation (SIM card, analog phone or PBX FXO port or
®
2N EasyGate IP
or the antenna near television,
for
®
15/92