2N EasyGate IP User Manual page 58

5.6.1 Babycall
The Babycall folder helps you set automatic calls. If the Babycall function is enabled, a
defined period of time is counted down after the phone off-hook (the default value is
5000 ms). Unless you start dialing by the end of this timeout,
the dialing end and starts setting up a call to the predefined phone number – from this
®
moment on, 2N EasyGate IP
outgoing call. Any dialing during the Babycall timeout countdown cancels this
function and a standard outgoing call is made.
Enable – enable/disable the Babycall function, automatic call without dialing.
Time – set the time interval between the line off-hook and automatic call
beginning.
Phone number – define the phone number for the automatic call destination.
2N TELEKOMUNIKACE a.s., www.2n.cz
behaves as if dialing was terminated in a standard
®
2N EasyGate IP signals
58/92