Configuration; Menu Overview; Physical Node Address (Pna/Rsn); Group Setting - Bosch AVENAR panel 8000 Manual

Hide thumbs Also See for AVENAR panel 8000:
Table of Contents

Advertisement

Available languages

Available languages

78
pt-BR | Configuration
19

Configuration

This chapter contains information about the following points:
19.1

Menu overview

Configuração
19.2

Physical node address (PNA/RSN)

The physical node address (RSN) of the panel is set in the panel firmware when switching on
the panel for the first time, there are no mechanical rotary switches. It must be identical with
the physical node address configured in the programming software. After a change of the
physical node address (RSN), a reboot of the panel is required.
To change the physical node address enter a number between 1 and 64. Choose OK e
reiniciar to make the change effective.
19.3

Group setting

Different kind of groups can be created using the FSP-5000-RPS programming software:
Bypass, isolate and walktest groups and input / output groups.
Each group can consist of one or more element(s).
Input groups consist of several detectors and/or logical zones; Output groups consist of
signaling devices and transmission devices. Specify which input group activates which output
group by using the programming software.
You can use the panel controller to carry out the following:
19.3.1

Adding or deleting

In order to add elements to a group or remove elements from it:
1.
2.
3.
4.
5.
2023-08 | 8.0 | F.01U.378.877
Physical node address (PNA/RSN), página 78
Group setting, página 78
Detector sensitivity, página 80
Operator, página 80
Rename elements, página 81
Network services, página 82
Overview, página 82
-> Definir end de nó físico
(PNA/RSN)
Sensib. do detetor
Renomear elementos
Serviços de rede
Adding elements to or removing elements from groups.
Renaming groups.
In the start menu, select Configuração
Definir grupos
Select the required type of group.
Two different lists are displayed.
Select a list, e.g. Por descrição.
A list of the various input groups is displayed.
Select the list field you require.
The list field is marked.
You can select various options:
Definir grupos
Operador
Informação Geral
Sobre o...
Manual do utilizador
AVENAR panel 8000 | AVENAR panel 2000 |
AVENAR keypad 8000
Bosch Sicherheitssysteme GmbH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents