6 | NETWORK COMPONENTS | GEOKON
2.4.1 SINGLE-CHANNEL (8900-XX-ADR-CBL)
For use with sensor cables with stripped and tinned ends. The sensor cable
passes through an external cable gland and is wired into the terminal block.
FIGURE 5: Mesh Addressable Logger (8900-XX-ADR-CBL)
2.4.2 FOUR-CHANNEL (890X-XX-04C-CBL)
FIGURE 6: Four-Channel Logger (890X-XX-04C-CBL)
Note: When inserting stripped conductor wires into the terminal blocks, be sure
to connect them to the VW terminal blocks.
A four-channel logger can be configured as follows:
Model
Maximum Number of Gauges
890X‑XX‑04C‑CBL
Four
TABLE 2: Four-Channel Logger Gauge/Load Limits
Maximum Number of Load Cells
One 3‑gauge or one 4‑gauge load cell
5:
6:
2: