Ce Declaration Of Conformity - ABB ETP Operating Instructions Manual

Pressure and level transmitter for the process industry
Table of Contents

Advertisement

CE
Se också avsnitt 3 "CE godkännanden, information".
I CE märkningen ingår godkännanden för EMC och PED.
DEKLARATION OM ÖVERENSSTÄMMELSE
enligt ISO/IEC Guide 22 och BS 7514
Tillverkare:
Pondus Instruments AB
Sweden
Tillverkaren intygar härmed att produkten
Produkt:
ETP90A/H/PA-XXXX där X kan vara en siffra 0-9, eller en
bokstav A-Z.
uppfyller följande harmoniserade standarder eller andra normerande dokument
Direktiv 89/336/EEC från maj 1989 i överensstämmelse med standaderna.
RFI utstrålning enligt
EN 50081-2 1993
EMI/RFI instrålning
EN 50082-1 1995
Direktiv 97/23/EG (Pressure Equipment Directive, PED) enligt standarden
APED 1999/AFS1999:4 med följande undantag:
a) om produkten används som säkerhetsutrustning måste den CE märkas i
den kompletta anläggningen.
b) om process mediet är ämnen enligt grupp 1 i direktivet 67/548/EEG är max
PS, för berörda anslutningar: 4 och H: 12,5 bar; 8, D och C: 18 bar; E: 16
bar; V: 15 bar; G: 83 bar, där siffror och bokstäver anger anslutningstyp i
transmitterns typ nummer. (Se typbeteckningar i datablad.)
Utfärdat:
17 may 2004, Stockholm, Sverige
Lars Göransson
VD
20
CE
See also section 3 "CE approvals, information".
The CE mark includes approvals for EMC and PED
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and BS 7514
Manufacturer
Pondus Instruments AB
Sweden
The manufacturer hereby declares that the product
Product:
ETP90A/H/PA-XXXX where X can be a number 0-9 or a
letter between A-Z
conforms to the following harmonized standards or other normative
documents
Directive 89/336/EEC as of May 1989 due to compliance with the following
standards:
RFI suppression
EN 50081-2 1993
EMI/RFI shielding
EN 50082-1 1995
Directive 97/23/EG (Pressure Equipment Directive, PED) according to the
basic technical standards/product standards
APED1999/AFS1999:4 with the following exceptions:
a) if the product is used as safety equipment it must be CE marked in the
complete construction.
b) if the process media is fluids according to group 1 in the directive 67/548/
EEG max PS are, for the connections: 4 and H: 12,5 bar; 8, D and C: 18 bar;
E: 16 bar; V: 15 bar; G: 83 bar where the numbers and letters stands for the
connections in the type number (see data sheet for type numbers).
Issued:
17 may 2004, Stockholm, Sweden
Lars Göransson
VD

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Etp90paEtp90ffEtp90aEtp90h

Table of Contents