Activation - hanshow HS-AT2311 Product Manual

Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual

5 Activation

Follow the steps below to activate HS-AT2311:
1. Before use shelf edge digital signage HS-AT2311, check and ensure the power
cable connection and network cable connection are correct.
2. Make sure to use the standard 12V power adapter.
3. After power-on, the backlight of HS-AT2311 display is on, and the system starts to
start.
4. The startup time is about 35 seconds. After system startup, the screen displays
standard system interface or preset playback content.
5. After system startup, configure network settings according to instructions in section
4.1, for HS-AT2311 IP settings and other configurations.
6. If the configuration is correct and complete, HS-AT2311 automatically connects to
Wi-Fi network. If the connection is successful, the network status indicator shows
the connection status and periodically reconnects until the connection is successful.
Otherwise, "!" is displayed.
Note: To use 2.4G Wi-Fi, it's recommended to set 2.4G channel to 1, 6, or 11.
15 Hanshow Copyright Reserved ©
Zhejiang Hanshow Technology Co., Ltd.