Page 1
Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual V1.0.0 HS-SIGNAGE-AT2311001 For more information, visit our website at: http://www.hanshow.com...
Page 2
Hanshow. Offenders will be liable for any and all damages caused by their offence hereof and will be subject to all remedies that Hanshow is entitled to seek under applicable laws.
The manual mainly introduces functions, structure, hardware parameters, performance, installation, and precautions for shelf edge digital signage HS-AT2311. Thank you very much for shelf edge digital signage HS-AT2311. Please read the product manual carefully before using this product, retain the document for subsequent use or for the next owner.
Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual EXPLANATION OF TERMS Term Expanded form Description Local Area Network Local Area Network Liquid Crystal Display Liquid Crystal Display Radio Frequency Radio Frequency RS232 EIA-RS-232 EIA-RS-232 Universal Serial Bus Universal Serial Bus...
1 Overview HS-AT2311 is the first-generation shelf edge digital signage independently developed by Hanshow. With its high integration, HS-AT2311 meets the requirements for higher performance, nice appearance, shelf match, appropriate space, and low power consumption of shelf edge digital signage; thus providing users with better marketing business experience.
Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual 1.2 Performance HS-AT2311 is an important component of Hanshow digital shelf and marketing system. As a terminal display device, it is responsible for displaying the data transmitted from the data center server. Connected with the digital marketing system through wireless network interface (Wi-Fi), HS-AT2311 establishes two-way 2.4G/5GHz wireless...
Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual Name Description Video format: MPEG-1, MPEG-2, MPEG-4, H.263, H.264, VC1, RV, and other video formats Up to 1080p Media playback Image format: JPG, BMP, PNG, GIF and other image formats Rotate/slide show Up to 4096*4096 1.3 Functions...
USB 2.0 port extended from Type-C port. Used to connect salve USB port devices such as U disk. Extended from Type-C port to connect DC power adapter. Hanshow Power port provides standard 12V-2A adapter. The port can also provide 12V output power.
USB 2.0 port extended from Type-C port. Used to connect salve USB port devices such as U disk. Note: Be sure to use the cables provided by Hanshow. For more information, see Hanshow Cable User Manual. 2.3 Nameplate HS-AT2311 nameplate is as shown in Figure 2-2.
Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual Table 2-3 describes the information on HS-AT2311 nameplate. Table 2-3 HS-AT2311 nameplate information Area Description NAME: Product category Upper-left gray box MODEL: Unique model name in Hanshow area RATING: Rated voltage and current...
Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual 3 Installation This chapter introduces HS-AT2311 installation and required accessories. 3.1 Description HS-AT2311 needs to be installed on the shelf end for better effects of visual playback and marketing campaign, as shown in Figure 3-1.
This chapter describes network settings and system upgrade of HS-AT2311. 4.1 Network settings HS-AT2311 currently only supports direct operation of the device for network settings. HS-AT2311 support both Wi-Fi and Ethernet connections. You can configure network environment according to actual use scenarios.
Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual connects to the wireless network, as shown in Figure 4-3. If the entered password is correct, the system connects to the wireless network successfully, and shows message indicating successful network connection. This completes the DHCP (dynamic IP assignment) configuration of the wireless network.
Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual Configuration item Description IP address IP address, can be configured when IP setting is set to static. Gateway address, can be configured when DHCP is selected for IP Gateway settings. The bit length of the network prefix, usually 24, can be configured Network prefix length when DHCP is selected for IP settings.
Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual 3. Select DHCP or Static IP. If Static IP is selected, the bottom of the page shows some configuration items, as shown in Table 4-2. Table 4-2 Ethernet static IP configuration options...
2. Make sure to use the standard 12V power adapter. 3. After power-on, the backlight of HS-AT2311 display is on, and the system starts to start. 4. The startup time is about 35 seconds. After system startup, the screen displays standard system interface or preset playback content.