Activation - hanshow HS-AT3701 Product Manual

Hanshow Shelf Edge Digital Signage HS-AT3701 Product Manual

5 Activation

Follow the steps below to activate HS-AT3701:
1. Before using shelf edge digital signage HS-AT3701, check and ensure the power
cable connection and network cable connection are correct.
2. To use a power adapter for power supply, make sure to use a standard 12V power
adapter, and the current capacity is at least 5A
3. After power-on, the backlight of HS-AT3701 display is on, and the system starts to
start.
4. The startup time is about 35 seconds. After system startup, the screen displays
standard system interface or preset playback content.
5. After system startup, configure network settings according to instructions in
section 4.1, for HS-AT3701 IP settings and other configurations.
6. If the configuration is correct and complete, HS-AT3701 automatically connects to
Wi-Fi network. If the connection is successful, the network status indicator shows
34 Hanshow Copyright Reserved ©