Figure 4-3 Enter Wireless Network Password; Figure 4-4 Tap Advanced Options To Set Static Ip; Table 4-1 Wireless Network Static Ip Configuration Options - hanshow HS-AT2311 Product Manual

Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual
connects to the wireless network, as shown in
is correct, the system connects to the wireless network successfully, and shows
message indicating successful network connection. This completes the DHCP
(dynamic IP assignment) configuration of the wireless network.
If dynamic IP setting or other network setting is required, on the password input
page, swipe down the page, and then tap Advanced options, as shown in
4-4.
The bottom of the page shows configuration options for the wireless network.
4-1 describes configuration details.

Table 4-1 Wireless network static IP configuration options

Configuration item
Proxy
Proxy server host name
Proxy server port
Do not use proxy for
PAC URL
IP setting
12

Figure 4-3 Enter wireless network password

Figure 4-4 Tap Advanced options to set static IP

Network proxy, configuration item for network proxy server, can be
configured manually or automatically.
Proxy server IP address, can be set when the proxy is configured
manually.
Proxy server port number, can be set when the proxy is configured
manually.
Domain names that do not use proxy. The domain names configured
here will not make network interactions through the proxy server. This
configuration item can be set when the proxy is configured manually.
Automatic proxy configuration script, can be configured when the
proxy is configured automatically.
If it's set to static, device IP address needs to be manually configured.
If it's set to DHCP, device IP address needs to be obtained from the
DHCP server.
Figure 4-3. If the entered password
Description
Hanshow Copyright Reserved ©
Zhejiang Hanshow Technology Co., Ltd.
Figure
Table