Table of Contents
Advertisement
Hanshow Shelf Edge Digital Signage HS-AT2311 Product Manual
3. Select DHCP or Static IP. If Static IP is selected, the bottom of the page shows
some configuration items, as shown in
Configuration item
IP address
Gateway
Subnet mask
DNS
Note: After the manual configuration is complete, the system saves the
configuration parameters. When switching between manual and automatic settings, the
configuration does not need to be re-configured.
4.2 System upgrade
HS-AT2311 supports two upgrade methods:
Manual upgrade by U disk
The file system of USB flash drive is FAT32. Create folder named upgrade under
the root directory of the USB flash drive. Save the system upgrade compression
package to the folder. After device startup, insert the USB flash drive. The system
automatically upgrades.
Automatic upgrade through the network
The device should be connected to extranet, or a server should be deployed for
upgrade in the intranet, so that the device can be upgraded through interaction with
the server.
Note: Do not cut off power supply during the upgrade process. Power cut can
damage the system.
14
Table 4-2 Ethernet static IP configuration options
Static IP address to be configured
Gateway address to be configured
Subnet mask to be configured
Domain name servers, including DNS1 and DNS2. DNS1 is the
primary DNS server. Only when DNS1 cannot find IP addresses
corresponding to domain names or when DNS1 is unavailable, can
DNS2 configuration take effect. This configuration item can be
configured when DHCP is selected for IP settings.
Table
4-2.
Description
Hanshow Copyright Reserved ©
Zhejiang Hanshow Technology Co., Ltd.
Advertisement
Table of Contents
