Mechanical Drawing; Jumper Settings; Clear Cmos Data - DFI KD331-C236/Q170 User Manual

Mechanical Drawing

209.55
198.98
173.73
165.82
135.39
105.13
90.81
84.63
47.29
26.97
0.00
Chapter 2 Hardware Installation
Chapter 2

Jumper Settings

Clear CMOS Data

203.20
If you encounter the followings,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
45.72
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP1 pins 2 and 3 to On. Wait for a few seconds and set JP1 back to its default setting,
pins 1 and 2 On.
20.32 3. Now plug the power cord and power-on the system.
16
1 2 3
1-2 On:
Normal (default)
JP1
1 2 3
2-3 On:
Clear CMOS Data
www.dfi .com