Table of Contents
Advertisement
Mechanical Diagram
98.00
22.86
Chapter 2 Hardware Installation
Chapter 2
Important:
Electrostatic discharge (ESD) can damage your board, processor, disk drives, add-in
boards, and other components. Perform installation procedures at an ESD workstation
only. If such a station is not available, you can provide some ESD protection by wear-
ing an antistatic wrist strap and attaching it to a metal part of the system chassis. If
a wrist strap is unavailable, establish and maintain contact with the system chassis
throughout any procedures requiring ESD protection.
159.84
System Memory
154.94
Important:
When the Standby Power LED lights red, it indicates that there is power on the sys-
tem board. Power-off the PC then unplug the power cord prior to installing any de-
113.91
vices. Failure to do so will cause severe damage to the motherboard and components.
93.31
89.76
52.31
24.69
0
10.16
Features
•
Two 204-pin SODIMM up to 8GB
•
Dual Channel DDR3L 1867MHz
9
DDR3L_1
DDR3L_2
Standby
Power LED
www.dfi .com
Advertisement
Table of Contents
