DFI KD331-C236/Q170 User Manual page 34

CPU Configuration
This section is used to configure the CPU.
InsydeH2O Setup Utility
Advanced
CPU Confi guration
Intel Speed Step <Enabled>
Turbo Mode <Enabled>
CPU C States <Enabled>
Hyper-Threading <Enabled>
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter

Intel Speed Step
This field is used to enable or disable the Intel Enhanced SpeedStep Technology. If
enabled, Turbo Mode will appear for configuration.
Turbo Mode
Enable or disable the turbo mode.
CPU C States
Enable or disable the CPU Power Management.
Hyper-Threading
Enables this field for Windows XP and Linux which are optimized for Hyper-Threading
technology. Select disabled for other OSes not optimized for Hyper-Threading technol-
ogy. When disabled, only one thread per enabled core is enabled.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Allows more than two fre-
quency ranges to be sup-
ported.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Video Configuration
This section configures the video settings.
Advanced
Video Confi guration
Primary Display
Internal Graphics Device
Boot display
F1 Help ↑/↓ Select Item
Esc Exit ←/→  Select Item
Primary Display
Set the initial priority.
Internal Graphics Device
Keep IGFX enabled or disabled based on the setup options.
Boot display
Set the display device combination.
Note:
To control "Primary Display" & "Boot Display", first go to "Boot" menu and select
different "Boot Type".
Boot Type : Legacy Boot Type -> Hide Primary Display & Show Boot Display
Boot Type : UEFI Boot Type -> Show Primary Display & Hide Boot Display
Boot Type : Dual Boot Type -> Show Primary Display & Show Boot Display
34
InsydeH2O Setup Utility Rev. 5.0
Initial priority:
AUTO: PEG -> PCIe ->
PCI -> IGFX
<Auto>
IGFX: IGFX -> PEG ->
<Auto>
Primary Display
PCIe -> PCI
<VGA+DVI>
PEG: PEG -> PCIe -> PCI
Auto
-> IGFX
IGFX
PCI: PCI -> PCIe -> PEG
PEG
-> IGFX
PCIe
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi .com