Console Redirection
This section configures settings relevant to console redirection.
InsydeH2O Setup Utility
Advanced
Console Redirection Setup
Console Serial Redirect
<Disabled>
F1
Help
↑/↓
Select Item
F5/F6
Esc
Exit
←/→
Select Item
Enter
Console Serial Redirect
This field is used to enable or disable the console serial redirection function.
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Enable Console Redirec-
tion Function
Change Values
F9
Setup Defaults
Select
SubMenu
F10
Save and Exit
When Console Serial Redirect is set to enabled, the screen will appear like below:
Advanced
Console Redirection Setup
Console Serial Redirect
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
COMA
Enable VT-100, 115200, N81
COMB
Disable VT-100, 115200, N81
COMC
Disable VT-100, 115200, N81
COMD
Disable VT-100, 115200, N81
COME
Disable VT-100, 115200, N81
COMF
Disable VT-100, 115200, N81
Pci Serial Port 0:22:3
Enable VT-100, 115200, N81
F1
Help
↑/↓
Select Item
Esc
Exit
←/→
Select Item
Terminal Type
Select terminal type: VT_100, VT_100+, VT_UTF8 or PC_ANSI.
Baud Rate
Select baud rate: 115200, 57600, 38400, 19200, 9600, 4800, 2400 or 1200.
Data Bits
Select data bits: 7 bits or 8 bits.
Parity
Select parity bits: none, even or odd.
Stop Bits
Select stop bits: 1 bit or 2 bits.
Flow Control
Select flow control type: none, RTS/CTS or XON/XOFF.
43
InsydeH2O Setup Utility
Rev. 5.0
Enable Console Redirec-
tion Function
<Enabled>
<VT_100>
<115200>
<8 Bits>
<None>
<1 Bit>
<None>
F5/F6
Change Values
F9
Setup Defaults
Enter
Select
SubMenu
F10
Save and Exit
www.dfi .com