Scope Of Delivery; Accessories; Before First Use - Tarrington House QA18-0000001813 Assembly Instructions Manual

GAS CONNECTIONS / GAS CYLINDER / PRESSURE REGULATOR WARNINGS
1. Check the appliance and all connections regularly and each time the gas cylinder(s) is / are replaced for possible gas leaks (→ Testing for gas leaks).
2. Never check for gas leaks using a match or any other open flame.
3. Never alter or modify the pressure regulator(s) or gas supply assembly.
4. Always turn the gas supply off on the gas cylinder(s) and / or the pressure regulator(s) and disconnect the gas hose(s) after use.
5. Never store gas cylinders indoors or close to heat sources.
6. Always store gas cylinders in upright position, never in horizontal position. This could cause the gas cylinder to leak or gas could leak into the gas hose.
7. Never use the appliance without the pressure regulator(s).
8. Only use pressure regulators approved for liquid petroleum gas (LPG) and complying with national regulations. Observe the technical data (→ TECHNICAL
DATA).
GAS HOSE WARNINGS
1. Inspect the gas hose(s) prior and after each use - look for any cuts, cracks excessive wear or other damage. Let the gas hose(s) be replaced every one to
two years by a qualified technician or the retailer only. Have brittle gas hoses and their connections exchanged. In case of doubts, ask a local specialist.
2. Protect the gas hose(s) against damages. Do not let it / them hang over sharp edges, do not twist, squeeze or bend it / them. Keep the gas hose(s) away
from hot surfaces and ensure that nobody can trip over it / them.
3. Only use a gas hoses approved for liquid petroleum gas (LPG) and complying with national regulations. Observe the technical data (→ TECHNICAL DATA).
4. Every kind of work or replacement of the hoses is to be conducted according to manufacturer's instruction, by qualified personal or specialists.
IF YOU SMELL GAS
1. Never light the appliance if you smell gas.
2. Immediately turn the gas supply off on the appliance as well as on the gas cylinder(s) and / or the pressure regulator(s).
3. Extinguish all open flames near the appliance, such as candles or torches. Switch all electric appliances in the surrounding off.
4. Make sure the area is well-ventilated with fresh air.
5. Open the cover(s) of the appliance in order to let the gas escape.
6. Do not use the appliance any longer and have it repaired by an authorized professional only, should it still smell of gas.

SCOPE OF DELIVERY

Refer to the illustration pages in the front section of this instruction manual for details.
Make sure the scope of delivery is complete and free of any damage. Contact the dealer from whom you purchased the appliance if you find that parts are
missing or show damage (→ WARRANTY).
Do not use the appliance unless missing parts have been delivered in addition or defective parts have been replaced. Using an incomplete or damaged
appliance leads to personal injury und property damage.

ACCESSORIES

To operate this appliance safely and correctly, some accessories, i. e. tools and attachments, are necessary. Refer to the illustration pages in the front section
of this instruction manual for details.
Ensure that you have the accessories and tools needed for commissioning and operation available. This also includes suitable personal protective equipment.
Accessories and tools are available through your authorised dealer. When buying always consider the technical requirements of this appliance (→ TECHNICAL
DATA).
If you are not certain, ask a qualified specialist and get advice from your trusted dealer.
NOTE: This instruction manual contains information and suggestions for several attachments and their uses. The attachments depicted are not
necessarily included in the shipment, but are meant to indicate additional possibilities for using this appliance.

BEFORE FIRST USE

UNPACKING
1. Unpack all parts and lay them on a flat, stable surface.
2. Remove all packing materials and shipping devices (if applicable).
WARNING!
The appliance and the packaging are not children's toys! Children must not play with plastic bags, sheets and small parts! There is a danger of
choking and suffocation!
ASSEMBLING
1. Assemble the appliance completely and make all required adjustments prior to operation.
2. Follow the assembly and operation instructions closely. Use the figures as visual guide.
3. Pay attention to small parts such as screws and nuts that are loosened or removed for assembly or during adjustments. Keep them safe in order to avoid
losing them.
4. The appliance is large. Assemble with two people.
WARNING!
Use the appliance only after it has been completely assembled and adjusted!
Choosing gas
1. Propane gas cylinders can be used throughout the entire year. Butane gas cylinders work best during the summer. They are distinctly less efficient at
temperatures under +10 °C.
2. We recommend using either 5 kg or 11 kg gas cylinders, for best performance.
3. Do not allow cylinders to be filled beyond 80% capacity. Over-filled cylinders can create a dangerous condition due to build-up pressure and cause the
valve to expel propane gas vapours. The vapour is combustible and if it comes in contact with a spark source or flame an explosion causing severe burns,
bodily harm, or death could occur.
4. Always use a protective cylinder cap when appliance is not connected to the cylinder(s).
Gas connections
WARNING! Be aware of flashback!
Make sure there is no debris, spiders, small insects or webs inside the head of the gas cylinder(s), pressure regulator(s), burner(s), burner tube(s)
or hose(s), before any connection is made. They can obstruct the gas flow, which could result in a fire in and around the burner tube. This kind of
fire is known as "flash-back" and can cause serious damages. Check and clean (→ CLEANING, MAINTENANCE AND REPAIR) all the parts of the
appliance before assembling it, to reduce the chance of its occurrence.
7
GB