Connecting With A Television Using The 3.5Mm Audio Cable - Cambridge SoundWorks Oontz Angle 3 PRO Soundbar User Manual

Connecting with a Television Using the 3.5mm Audio Cable

- Plug one end of the 3.5mm Audio Cable into the AUX In Connector on the OontZ Angle 3 Pro Soundbar.
- Plug the other end of that 3.5mm Audio Cable into the Headphone or Audio-Out Connector on your television.
- Make sure both ends of the cable are fully inserted.
-If your TV does not have a Headphone Connector or Audio-Out Connector but does have Left Right Analog Audio Out you will need a
3.5mm to RCA cable as shown below.
- Press the Source Button
'Aux In Source'
DC IN 15V
until the light is lit Green. The speaker will respond with
AUX IN OPTICAL IN
3.5mm to 3.5mm Audio Cable (included)
OR
3.5mm to RCA audio cable is not included
AUDIO OUT
- or -
HEADPHONE
OUT
OPTICAL
DIGITAL
R AUDIO OUT
L
L R
ANALOG
AUDIO OUT
Page 6