Dual Mode - Connect Two Oontz Angle 3 Pro Soundbar Speakers Together - Cambridge SoundWorks Oontz Angle 3 PRO Soundbar User Manual

Connecting two OontZ Angle 3 Pro Soundbar speakers together for
Left Channel - Right Channel
You can also us the OontZ app to connect two OontZ Angle 3 Pro Soundbar speakers together - See page 20 for instructions on using the
OontZ app
– Turn on both OontZ Angle 3 Pro Soundbar speakers.
– Connect one of the speakers with your device. This speaker will serve as the Master Speaker.
– On the second speaker press and release the Source Button
second speaker has a solid Blue Light it is connected to a device and you need to disconnect it by pressing and holding down the
Multi-Function Button
- On the Master Speaker (speaker connected to your device) press and hold down the Play/Pause button
Play/Pause Button is flashing with a White Light and the speaker says "Dual Pairing".
- After a few seconds both speakers Play/Pause Button
and the second speaker will say "Right Channel". The speakers will be connected together for Left Channel - Right Channel and you are
ready to play.
for 3 seconds until the Sourece Button
until lit Blue. The Source Button
light begins flashing.
will be lit with a solid White light. The Master speaker will say "Left Channel"
light needs to be flashing. If the
for 3 seconds until the
Page 13