Cambridge SoundWorks Oontz Angle 3 PRO Soundbar User Manual page 22

Surround Mode - Important Notes
Turning the speakers off
– Turning the Master Speaker off will turn off all the speakers.
– Turning a Slave Speaker off first will only turn that speaker off and the other Slave Speakers will continue to play. The Master Speaker
will play as a single speaker if no other Slave Speakers are connected.
Turning the speakers back on
– Turn all the speakers on and repeat the pairing process -
– Turn one speaker on and the speaker can be paired and connected with another device. The speaker will play as a single speaker.
Disconnecting the speakers from each other
– To disconnect a single Slave Speaker, press and release the Multi-Function Button
connected to the Master Speaker.
– To disconnect all the speakers, turn off the Master Speaker or press and release the Multi-Function Button
The speakers will all be disconnected from the Master Speaker.
– If the Slave Speaker(s) are not turned off and are disconnected by pressing and releasing the Multi-Function Button
Speaker. The speakers will automatically reconnected when the Master Speaker when Multi-Function Button
Speaker is pressed and released again. If a Slave Speaker is turned off the Multi-Function Button
pressed and released to enter Surround Mode.
Note: To pair a Slave Speaker with a flashing Orange Light with another device, press and release the Multi-Function Button
Source Button Light will begin flashing Blue and the OontZ Angle 3 Pro is ready to pair and connect with the device.
See page 17 for instructions.
on the speaker. All other Slave Speakers will stay
on the Master Speaker.
on the speaker will need to be
on the Master
on the Master
. The
Page 19