Connecting With Your Device Using Bluetooth - Cambridge SoundWorks Oontz Angle 3 PRO Soundbar User Manual

Connecting with Your Device Using Bluetooth -- Step 1 --
Press the Source Button until the light is lit Blue
Source Button Light is Flashing Blue
- The OontZ Angle 3 Pro Soundbar is ready to pair and connect.
Source Button Light is Solid Blue
- Your device has connected to the OontZ Angle 3 Pro Soundbar and is ready to play.
- The OontZ Angle 3 Pro Soundbar allows the last device it was connected with to automatically
reconnect with the speaker each time the speaker is turned on and that device is within range.*
The OontZ Angle 3 Pro Soundbar can only be connected to one Bluetooth device at a time.
- To pair and connect to a different device, you need to first disconnect the currently paired device.
- To disconnect the current device, press and hold down the Multi-Function button
for 3 seconds.
- The Source Light will begin flashing and the OontZ Angle 3 Pro Soundbar is ready for the next device to pair and
connect.
*Exception: certain devices may not automatically reconnect. When connected to an Amazon Echo device it will not automatically
reconnect. You will need to say to your Amazon Echo device, "Alexa, connect my speaker".
- Your device needs to be within 100 unobstructed feet of the OontZ Angle 3 Pro Soundbar to pair and connect.
If there is an issue when connecting please move your device closer to the speaker, then pair and connect.
Page 7