Cambridge SoundWorks The Surround 5.1 Instructions Manual
Cambridge soundworks the surround 5.1: user guide
Hide thumbs
Also See for The Surround 5.1:
Advertisement
Table of Contents
- 1 Table of Contents
- 2 Introduction
- 3 Unpacking and Checking for Shipping Damage
- 4 Multipole Technology
- 5 Placement
- 6 Speaker Connections
- 7 Finalizing Your Installation
- 8 Surround Configuration Options
- 9 About Amplifier Power
- 10 Cleaning the Cabinets
- 11 Difficulty
- 12 10-Year Limited Warranty
- Download this manual
Contents
Instructions for:
Introduction ............................................................................................. 1
Unpacking And Checking For Shipping Damage ...................................... 2
Multipole Technology ............................................................................... 3
The Surround 5. 1 &
Placement ................................................................................................. 4
Speaker Connections ................................................................................ 5
Finalizing Your Installation ..................................................................... 6
Surround Configuration Options .............................................................. 7
The Surround II 5. 1
About Amplifier Power ............................................................................. 7
Cleaning The Cabinets .............................................................................. 8
Difficulty? ................................................................................................. 8
Speakers
10-Year Limited Warranty ........................................................................ 9
by Henry Kloss
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cambridge SoundWorks The Surround 5.1
Summary of Contents for Cambridge SoundWorks The Surround 5.1
-
Page 1: Table Of Contents
Unpacking And Checking For Shipping Damage ... 2 Multipole Technology ... 3 The Surround 5. 1 & Placement ... 4 Speaker Connections ... 5 Finalizing Your Installation ... 6 Surround Configuration Options ... 7 The Surround II 5. 1 About Amplifier Power ... 7 Cleaning The Cabinets ... -
Page 2: Introduction
, DTS variety of digital sound processors (DSP) available. Please read the simple instructions that follow. Optimum surround performance The Surround 5.1 depends on factors discussed in these instructions, such as insuring all the speakers are “in-phase” and correctly positioned. -
Page 3: Unpacking And Checking For Shipping Damage
Unpacking And Checking For Shipping Damage 1. As you unpack your new The Surround 5.1 speaker system speakers, please examine each speaker unit carefully for signs of shipping damage. If there is any damage, do not install or use the speakers. Keep the... -
Page 4: Multipole Technology
Dipole Setting the MultiPole Switch The MultiPole switch alters the directionality of the speaker. “Dipole” mode sends the mid and high-frequency output along the side walls, so all listeners hear a diffuse, enveloping sound. “Bipole” mode concentrates this... -
Page 5: Placement
Placement Be sure to connect each surround The Surround 5.1 and The Surround speaker “in-phase”, as described in II 5.1 should be positioned in a the “Speaker Connections” room according to the following section on the guidelines. next page. Be sure to observe the “LEFT” or “RIGHT”... -
Page 6: Speaker Connections
Push down on the spring-loaded receiver or the speakers. terminal tabs to expose the connec- The Surround 5.1 tor holes. Insert the bare wires into The stripped ends of the speaker the holes and release the connec- cable can be inserted directly tors, as shown in C. -
Page 7: Finalizing Your Installation
SoundWorks Audio/Video Consultant at 1-877-YES-HIFI. URROUND ™ MULTIPOLE ™ SURROUND SPEAKER RIGHT PATENTS: 5,043,970; 5,189,703; 5,222,059; 5,109,416 CAMBRIDGE SOUNDWORKS, INC. NEWTON, MASSACHUSETTS USA 1-800-367-4434 USA 617-332-5936 OUTSIDE THE USA MADE IN TAIWAN 8 OHMS MAGNETICALLY 00000 SHIELDED... -
Page 8: Surround Configuration Options
About Amplifier Power • For Dolby Surround-encoded • The Surround 5.1 can be used program material, Dolby Labora- safely to play music with the tories recommends the combined most powerful amplifiers and... -
Page 9: Cleaning The Cabinets
If the cabinet ever requires more than simple dusting, use a win- dow cleaning product. Avoid spraying the cleaner directly on the speaker grilles to prevent damage to the speaker drivers. Use a soft, lint-free cloth. Do not use paper towels or other material which could leave lint behind on the textured Nextel finish. -
Page 10: 10-Year Limited Warranty
Authorized Service ® Dolby Surround, Pro Logic, Dolby Digital and DTS are registered trademarks of Dolby Laboratories Licensing Corporation. ® The Surround is a registered trademark of Cambridge SoundWorks, Inc. For warranty information contact: Cambridge SoundWorks, Inc. - Page 11 311 Needham Street, Newton MA 02464 1-877-937-4434 Fax: 617-527-3194 www.cambridgesoundworks.com Email: info@cambridgesoundworks.com Company P81-1120 0400...
Need help?
Do you have a question about the The Surround 5.1 and is the answer not in the manual?
Questions and answers