Cambridge SoundWorks Oontz Angle 3 PRO Soundbar User Manual page 30

Using the OontZ app for Surround Mode
Connecting 2, 3 or 4 supported OontZspeakers together
– Turn the OontZ Angle 3 Pro Soundbar speaker.
– Connect the OontZ Angle 3 Pro Soundbar speaker to your device. This speaker will serve as the Master Speaker.
– Turn on the other supported OontZ speakers. These speakers will be the Slave Speakers.
Note: Only OontZ Angle 3 Pro Soundbar, OontZ Angle 3 ULTRA (4th Gen) and OontZ Angle 3 Pro (2nd Gen) speakers are supported. Other
OontZ speakers and previous generations of the OontZ Angle 3 ULTRA and OontZ Angle 3 Pro are NOT supported.
Connecting a 2nd, 3rd or 4th OontZ Angle 3 Pro Soundbar as Slave Speakers
– The OontZ Angle 3 Pro Soundbar Slave speakers must not be connected to any device, their Source Button Light
a speaker has a solid Blue Light it is connected to a device and you need to disconnect it by pressing and holding down the Mulit-Function
Button for 3 seconds until the Source Button Light
Connecting a 2nd, 3rd or 4th OontZ Angle 3 ULTRA (4th Gen) and OontZ Angle 3 Pro (2nd Gen) as Slave Speakers
– The Slave speakers must not be connected to any device, their Bluetooth Light
connected to a device and you need to disconnect it by pressing and holding down the Bluetooth Button
Light begins flashing Blue.
begins flashing Blue.
must be flashing Blue. If a speaker has a solid Blue Light it is
must be flashing Blue. If
for 3 seconds until the Bluetooth
Page 27