Cambridge SoundWorks Oontz Angle 3 PRO Soundbar User Manual page 27

Using the OontZ app for Dual Mode
Select the Menu in the upper left hand corner of the app and select 'Dual Mode' from the menu.
Press 'Connect' to connect
two OontZ Angle 3 Pro
Soundbar speakers in Dual
Mode.
Disconnecting and Reconnecting the OontZ Angle 3 Pro Soundbar speakers.
– Press 'Disconnect' to disconnect the two OontZ Angle 3 Pro Soundbar connected speakers.
– The Play/Pause Button White Light on the second speaker will turn off and the speakers will be disconnected from each other.
– To reconnect press 'Connect' with both OontZ Angle 3 Pro Soundbar speakers turn on.
Playing the audio from a video in Dual Mode
– To play the audio from a video or TV in Dual Mode you will need to connect the Master Speaker to your device or TV using a the
3.5mm Stereo Audio Cable or Optical Digital Cable, allowing the audio and video to play in sync with each other. If the Master
Speaker is connected over Bluetooth to your device or TV there will be a delay in the audio playback from a video.
After a few seconds the second speaker Play/Pause Button Light will be
lit solid White. The Master Speaker will say "Left Channel" and the second
speaker will say "Right Channel". The speakers are connected together for
Left Channel - Right Channel and you are ready to play.
Master Speaker
Left Channel
Lit Blue,
Lit Blue if
Lit White
Green,
connected to
or Red
the OontZ App
Second Speaker
Right Channel
Lit White
Blue Light off
Page 24