Cambridge SoundWorks Oontz Angle 3 PRO Soundbar User Manual page 14

Using the OontZ Remote with the OontZ Angle 3 Pro Soundbar
Volume Up
- Press one time to increase the volume of
your OontZ Angle 3 Pro Soundbar one
level.
- Press and hold to increase the volume of
your OontZ Angle 3 Pro Soundbar until the
desired volume is reached.
Source set to Bluetooth - Track Back Function
- Press and release to go to the beginning of the
track or the previous track depending on the
connected device's media player.
Bluetooth Button
- With the Source set to Bluetooth, Press and release
to enable the OontZ Angle 3 Pro Soundbar to
connect with your Bluetooth enabled device.
- Press and hold for 3 seconds to disconnect your
connected Bluetooth device from the OontZ Angle
Pro 3 Soundbar.
- When already connected to your Bluetooth device
or when Aux In or Optical In sources are selected,
press and release once to enter or exit Surround
Mode.
Source set to Bluetooth
- Press one time to Pause and again to Play.
Source set to Aux In or Optical In
- Press one time to mute and again to unmute.
Source set to Bluetooth - Track Forward Function
- Press and release to go to the next track.
Volume Down
- Press one time to decrease the volume of your
OontZ Angle 3 Pro Soundbar one level.
- Press and hold to decrease the volume of your
OontZ Angle 3 Pro Soundbar until the desired
volume is reached.
Source and Mode
- Press and release to change between Aux In,
Optical In and Bluetooth sources.
- Press and hold to change between Music and
Movie Mode.
Power
- Press and hold for 3 seconds to turn on and
off the OontZ Angle 3 Pro Soundbar.
Page 11