Usb 3G/4G Dongle Settings - WEG Cassia X1000 Installation And Operation Manual

Settings

5.4.5 USB 3G/4G dongle settings

a) Before using the 3G/4G USB dongle, use a computer to make sure it is working and provides Internet access.
b) Plug the dongle into the USB port at the bottom base of the gateway and select the correct model via the
"USB Dongle Type" tab. Set the parameters if necessary.
c) Dongles with Type 1 and Type 2 RNDIS Driver Ethernet are supported:
Type 1: an APN must be specified. For example, wyleslte.gw7.vzwentp and 10569.mcs is KORE Wireless APN.
NOTE!
If a SIM card from another company is used, you should ask such company about the correct APN
to be used.
Type 2: the setup occurs automatically, thus presenting the LAN network. For example, the Huawei E3372s-153
dongle.
18 | Gateway Cassia X1000