Basic Settings; Wi-Fi Network Settings - WEG Cassia X1000 Installation And Operation Manual

a) Use a web browser (preferably Google Chrome) to access the gateway page.
b) Enter the IP 192.168.40.1 into the address tab. The screen on the side illustrates the initial settings portal.
c) Standard login accesses:
Old Password: admin Username: admin Password: 12345678 or weg1234@.
d) If the login data have been lost, it is possible to reset the gateway to factory default by pressing the reset button
at the bottom base of the gateway for 15 seconds.

5.4.3 Basic Settings

Make the connection and internet basic settings for the X1000 Gateway through the "Basic" tab. Some fields may
not appear, depending on the gateway firmware version.
Feature
Router Mode
Tx Power
Statistics Report Interval
AC Server Address
AC-Router Protocol Priority
CAPWAP Port
Connection Priority
Enable OAuth2 Token for
local API
Remote Assistance

5.4.4 Wi-Fi Network Settings

To set the gateway on a Wi-Fi network, you must first select the "Operating Mode: Client". The user can choose
DHCP or Static to obtain the IP address.
The user can also select the secure network mode, being thus necessary to provide the input data in order to
connect the gateway Wi-Fi with the Enterprise security level.
Security Mode
None
WPA2-PSK
WPA [TKIP] + WPA2 [AES]
[Enterprise WPA2
[Enterprise] WPA [TKIP]
+ WPA2 [AES]
Value
AC Managed Router
20
30 Seconds
cassia.weg.net
CAPWAP
6246, 6247
Select according to type of
network architecture
OFF
ON
Figure 5.7: Basic settings
Table 5.3: Wi-Fi network settings
EAP
PEAP-MSCHAPV2
TTLS
TLS
Requested data
---
Password
Required
[Enterprise] WPA [TKIP] + WPA2 [AES]
Identification and password
Identification, password and CA certificate
Identification, password and CA certificate,
Private Key and password
Gateway Cassia X1000 | 17
Settings