Table of Contents
Advertisement
Installation Guide
Plug the nonterminated end of the cable to the internal LVD/SE
S
2
TEP
connector.
Plug the internal LVD SCSI devices to the other cable connectors,
S
3
TEP
starting with the connector at the terminated end of the cable.
Plug First Device
to this Connector
N
OTE
termination disabled and cannot be changed. Proper SCSI
bus termination is provided by the terminator at the end of
the LVD SCSI cable. See Terminate the Ends on page 7 for
more information.
10
68-pin Internal LVD
SCSI Cable
68-pin Internal LVD/SE Connector
LVD (e.g., Ultra160 or
Ultra2) SCSI Devices
Built-in Terminator
on Cable
Internal LVD SCSI devices come from the factory with
Advertisement
Table of Contents
