Resetting The Ampere Hours Charged; Errors - Dometic Go Power! GP-PWM-30-SB User Manual

7.5 RESETTING THE AMPERE HOURS CHARGED

3 0 A M P P W M S O L A R C O N T R O L L E R

7.6 ERRORS

OVER VOLTAGE
3 0 A M P P W M S O L A R C O N T R O L L E R
LOW VOLTAGE
3 0 A M P P W M S O L A R C O N T R O L L E R
[page 12] | gpelectric.com
3 0 A M P P W M S O L A R C O N T R O L L E R
OPERATING INSTRUCTIONS
To reset the count of ampere hours charged, toggle to the ampere hours
charged. Press and hold the A Button for 6 seconds to reset the counter
to zero.
If the GP-PWM-30-SB experiences a battery over voltage (15.5V), the
controller will stop operating, and the display will begin to flash with
all icons. The controller will resume operating when the error is cleared.
Icons Displayed: All symbols
If the battery voltage reaches 11 volts, the battery SOC symbol will show
the text "LOW" beneath it. The controller will continue operating in this
condition and will only stop operating if the voltage drops below 9 volts.
Icons Displayed: Battery SOC Symbol, LOW